• Ordered and paid by 1 p.m. (German time) — shipped today
  • Specialist mail order from Hannover — advice by phone and email
  • PayPal, Klarna, credit card, bank transfer

Vaphit QHC Convection Vaporizer with 3D Dimpled Glass Stem


Price:
Sale price38,90 €

Tax included Shipping calculated at checkout

Stock:
In stock

Delivery times:

Germany DHL: 1 – 2 days
Germany DHL Express: 1 day
EU countries: 2 – 5 days
Same-day shipping (Mon–Fri) for orders and payments received by 1 p.m. (German time)

In detail

All about the Vaphit QHC Convection Vaporizer with 3D Dimpled Glass Stem

The Vaphit QHC Convection Vaporizer with 3D Dimpled Glass Stem combines the ease of use of a mechanical vaporizer with a particularly flavor-oriented heating technology. Instead of a battery, the device uses a quartz glass heating cap that is heated with a jet lighter. The heat then reaches your herbs via the incoming air.

The set also includes a glass stem with cooling dimples, an integrated kick hole, and extensive accessories for use and maintenance.

Pure Convection via the Quartz Glass Heating Cap

Unlike many classic, flame-operated vaporizers, the Vaphit QHC uses a convection system. The quartz glass cap is heated from the outside and transfers its heat to the passing air. This air then flows through the herb chamber and releases the active ingredients without the flame coming into direct contact with the plant material.

The herb chamber is made of 316 stainless steel and holds approximately 0.15 g of ground herbs. To heat it, a storm or jet lighter with two or, even better, three flames is recommended to heat the quartz cap as evenly as possible. Depending on the flame and application, heating takes approximately 30 to 60 seconds. With a little practice, you can individually influence the heat generation over the heating time and adapt your vaping experience to your preferences.

The delivery includes two quartz heating caps with different hole diameters of 1.0 mm and 1.5 mm. This allows you to try different airflow rates and find out which version you prefer.

3D Dimpled Glass Stem for Pleasantly Cooled Vapor

A special feature of the Vaphit QHC is the transparent 3D Dimpled Glass Stem. The small indentations in the glass, also called dimples, influence the airflow and increase the surface area that the vapor comes into contact with. This allows it to release some of its heat on its way to the mouthpiece.

In addition, the glass stem has a side kick hole. This allows you to regulate the amount of incoming ambient air while inhaling. If you close the opening with your finger, the airflow changes. If you open it, additional air flows in. This allows you to individually influence the draw behavior.

The tapered glass mouthpiece rests comfortably on the lips and, with the appropriate connection size, also allows use with a water filter. The transparent design also allows you to easily keep an eye on the herb chamber and any residue.

Simple Operation Without a Battery or Electronics

The Vaphit QHC, just like a DynaVap vaporizer, requires neither a battery nor a charging cable. A suitable jet lighter and a little practice heating the quartz cap are all that is needed. First, fill the stainless steel chamber with ground herbs and make sure not to pack them too tightly. This is because sufficient air must be able to flow through the plant material for convection.

Next, place the quartz heating cap on top and heat it evenly. Once the desired temperature is reached, you can begin inhaling. Since the device does not have an electronic temperature display, you control the heat input yourself through the duration and intensity of heating. You can tell by the color of the herbs when you can start vaping.

After use, the quartz cap initially remains very hot. With the included heat-resistant silicone finger guard, you can carefully remove it without touching it directly with your fingers. Then place the cap on a heat-resistant surface and let it cool down completely.

Flexible Combination with DynaVap Accessories

The Vaphit QHC has a modular design and can conveniently be combined with various compatible DynaVap components. The included glass stem, for example, can also be used with common DynaVap tips. Conversely, the stainless steel chamber of the Vaphit can be connected with suitable alternative stems.

This allows you to assemble your setup according to your personal preferences. The decisive factors are the appropriate connection and the correct size of the O-rings used.

Compatibility Overview

Component Compatibility
Vaphit QHC Stainless Steel Tip Fits the included glass stem
Common DynaVap Tips with Standard Connection Compatible with the 3D Dimpled Glass Stem
DynaVap Stems with Matching Fitting Can be combined with the Vaphit QHC Stainless Steel Tip
Water Filter Usable with a suitable glass fitting

Note: When combining it with accessories from other manufacturers, pay attention to the appropriate connection and the secure seating of the O-rings. Not every special version is automatically compatible.

Extensive Accessories for Cleaning and Maintenance

The Vaphit QHC comes with an extensive accessory set. In addition to the two quartz heating caps, the set contains several replacement screens, O-rings in different sizes, and practical tools for maintaining the vaporizer. With the included stainless steel rod, you can insert or remove the screens, while the metal tool is suitable, among other things, for filling the herb chamber.

For cleaning, the components can be carefully disassembled after they have cooled down completely. Glass and suitable stainless steel parts can be cleaned with appropriate cleaning agents. You should clean the O-rings and the silicone finger guard separately according to their material compatibility.

Conclusion: Versatile Convection Vaporizer for Individual Vaping Enjoyment

The Vaphit QHC impresses with a well-thought-out convection system, a stainless steel herb chamber, and a glass stem with integrated vapor cooling. The two quartz heating caps offer additional options for adjusting the draw behavior, while the kick hole allows for individual airflow control. Anyone looking for a mechanical vaporizer without a battery who prefers to control the temperature themselves by heating it will find this set to be a versatile alternative to electronic devices.

Technical Details:

  • Manufacturer: Vaphit
  • Model: QHC 3D Dimpled Glass Stem Kit
  • Product Type: Portable, flame-operated vaporizer
  • Heating System: Convection
  • Heat Source: Jet lighter
  • Glass Stem Material: Glass
  • Herb Chamber Material: 316 stainless steel
  • Heating Cap Material: Quartz glass
  • Heating Cap Wall Thickness: 1.5 mm
  • Heating Cap Hole Diameter: 1.0 mm and 1.5 mm
  • Filling Capacity: approx. 0.15 g
  • Heating Time: approx. 30 to 60 seconds, depending on the heat source
  • Kick Hole: Yes
  • Temperature Control: Manual via heat input
  • Power Supply: Not required

Product Details:

  • Mechanical convection vaporizer without a battery or electronics
  • Quartz glass heating caps for heating with a jet lighter
  • Pure convection heating for even heating of the herbs
  • 3D Dimpled Glass Stem with cooling dimples
  • Integrated kick hole for individual airflow control
  • Stainless steel herb chamber with a filling capacity of approximately 0.15 g
  • Two quartz heating caps with different hole diameters
  • Tapered mouthpiece for suitable water filters
  • Modular design with compatibility with selected DynaVap components
  • Extensive accessories with replacement screens, O-rings, and cleaning tools

Package Contents:

  • 1x Vaphit QHC 3D Dimpled Glass Stem
  • 1x Herb Chamber Made of 316 Stainless Steel
  • 1x Vaphit Storage Bag
  • 1x Metal Tool for Filling
  • 1x 304 Stainless Steel Rod for Inserting and Removing Screens
  • 1x Heat-Resistant Silicone Finger Guard
  • 1x Quartz Heating Cap with 1.0 mm Hole Diameter
  • 1x Quartz Heating Cap with 1.5 mm Hole Diameter
  • 5x 304 Stainless Steel Screens
  • 10x O-Rings (6.5 x 1.2 mm)
  • 10x O-Rings (7.0 x 1.2 mm)
  • 10x O-Rings (7.5 x 1.2 mm)
  • 10x O-Rings (8.9 x 1.2 mm)
  • 10x O-Rings (9.5 x 1.2 mm)
  • 10x O-Rings (10.0 x 1.2 mm)
  • Note: A jet lighter is not included.

More portable vaporizers

Manufacturer and responsible person (GPSR)
Hersteller

Vaphit

Room 955, No. 168, Songming Avenue, Hongxing Community, Songgang Street, Bao'an District, Shenzhen City, Guangdong Province, China

Email: sales@vaphit.com

Responsible person in the EU

VDN Berlin GmbH, Karl-Kunger-Str 28, 12435 Berlin, Germany, info@verdampftnochmal.de Email: shop@verdampftnochmal.de

Importeur

VDN Berlin GmbH, Karl-Kunger-Str 28, 12435 Berlin, Germany, info@verdampftnochmal.de Email: shop@verdampftnochmal.de

You might also like

Recently viewed